ヘルプデスク | Help desk

Why does the left/right misalignment or sloping degree appear high?

1. FAQ
2. AgriBus-NAVI

Please check if the installation position and direction of AgriBus-GMiniR is set correctly in Setting>GNSS>Device Mounting. If the device mounting settings are correct, the inclination will be abou...

• Edited October 25, 2022 07:12
• 1 follower
• 0 comments
• 0 votes

Quick manual for installation and setup

1. FAQ
2. AgriBus-GMiniR

 

• Edited October 25, 2022 07:05
• 1 follower
• 0 comments
• 0 votes

How can I install the antenna on an FRP cabin roof?

1. FAQ
2. AgriBus-GMiniR

Attach the steel plate to the roof with water- and weather-resistant double-sided tape and use the antenna's magnet.

• Edited October 25, 2022 06:40
• 1 follower
• 0 comments
• 0 votes

Can I pause a task and resume it without starting a new task?

1. FAQ
2. AgriBus-NAVI

Check the [Task Record] and [Guidance Line] checkboxes if you want to start the next task from where you left off this time. To return to the home screen, tap the arrow icon (←).

• Edited October 25, 2022 06:38
• 1 follower
• 0 comments
• 0 votes

[Reference Station] Where should RTK antennas be installed, such as on the roof of a building or in an office?

1. FAQ
2. AgriBus-GMiniR

Requirements for antenna installation locations are as follows 1）WiFi Internet connection environment (2.4GHz) 2) Open sky, outdoors (not indoors), rooftop is best. 3) Must have a USB power source....

• Edited October 25, 2022 06:22
• 1 follower
• 0 comments
• 0 votes

What are the appropriate X, Y, and Z settings for GNSS Antenna Position?

1. FAQ
2. AgriBus-GMiniR

Z=Height from the ground to the antenna Y=Distance from rear axle (forward is plus, backward is minus) X=0 if the antenna is set at the left or right center of the roof.  

• Edited October 25, 2022 06:10
• 1 follower
• 0 comments
• 0 votes

How should I install AgriBus-GMiniR in my cabin? If I change the position of the GMiniR installation, which value should I set (if the position is changed, should that value also be changed daily)?

1. FAQ
2. AgriBus-GMiniR

• Edited October 25, 2022 06:02
• 1 follower
• 0 comments
• 0 votes

Can I use the "Auto A/B" button to set A and B for the reference line? Or do I need to press the "A" button and then the "B" button?

1. FAQ
2. AgriBus-NAVI

Either the A→B button or the AutoA/B button can be used to create a reference line.

• Edited October 25, 2022 05:41
• 1 follower
• 0 comments
• 0 votes

AgriBus-NAVI

1. Product Manual
2. Manual List

AgriBus-NAVI User's Manual - Introduction (Public Version) AgriBus-NAVI User's Manual - Usage (Public Version)

• Edited November 08, 2021 06:13
• 1 follower
• 0 comments
• 0 votes

AgriBus-GTools

1. Product Manual
2. Manual List

AgriBus-GTools User's Manual (Public Version)

• Edited October 28, 2021 06:55
• 1 follower
• 0 comments
• 0 votes